Then selecting Name/Time/Language -> Time -> Edit
NTP Synchronization Frequency: Every 3 hoursįailed to sync with NTP server. It's simple tar file (GNU standard), but it must have ".These are my settings for a Buffalo LS220D in NAVIGATOR ->Management -> Name/Time/Language -> Time -> Edit + -s $(SUBPAGESIZE) -O $(VID_HDR_OFFSET) $(UBINIZE_OPTS) + -part -p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \ + $(KERNEL_UBIFS_OPTS) -r $(TOPDIR)/scripts/ubinize-image.sh \ + rm -rf -p Build/append-uImage-fakehdr, ramdisk) Rm -rf $(KDIR)/kernel_jffs2 Build/buffalo-kernel-ubifs + marvell,pins = "mpp55", "mpp57", "mpp62" ĭiff -git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile + compatible = "mxicy,mx25l8005", "jedec,spi-nor" + marvell,reg-init =, /* disable CLK125 */ + thermal-sensors = /* only one drivetemp sensor is supported */ + append-rootblock = "nullparameter=" /* override the bootloader args */ + compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp" + * Copyright (C) 2020 Daniel González Cabanelas + * Device Tree file for Buffalo LinkStation LS220DE +++ -23,8 +23,29 platform_check_image() /kernelĭiff -git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls220de.dts a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh Lan_mac=$(mtd_get_mac_ascii u-boot-env eth1addr)ĭiff -git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network Ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000"ĭiff -git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network a/package/boot/uboot-envtools/files/mvebu diff -git a/package/boot/uboot-envtools/files/mvebu b/package/boot/uboot-envtools/files/mvebu I removed trailing whitespaces that git apply claimed, and renamed to ls220dE.patch. I observed lsblk (and libmount1 dependency) missing on main build, I think it's a fundamental tool.Ĭouldn't do stress tests on cooling behavior, yet. XFS (md10): Deprecated V4 format (crc=0) not supported by kernel. F2FS-fs (md10): Can't find valid F2FS filesystem in 2th superblock F2FS-fs (md10): Can't find valid F2FS filesystem in 1th superblock Mount: mounting /dev/md10 on /mnt/warezRAID/ failed: Invalid argumentĪnd dmesg | tail: F2FS-fs (md10): Magic Mismatch, valid(0xf2f52010) - read(0x0) I'm unable to mount the buffalo xfs share, after getting /dev/md10 with mdadm, mount returns: In order to configure mdadm, it's needed to rename/delete /etc/config/mdadm and restart service. Just to clarify, it's a ram or a nand write? If nand, need to run just once after sysupg? The address/pointer won't change on each sysupg version/commit?
0 kommentar(er)
